Local-only Directory Number - Programming

Programming

Adding Local-only Directory Numbers

To add a local-only directory number to an element in a cluster:

1. Go to the Maintenance Commands form ( ) and use the LOCATE ALL FREE DN command to find a new unused DN.

2. Go to one of the device-based forms listed above.

3. Click Add.

4. Enter the new directory number.

5. Check the Local-only DN box. If you are adding the local-only directory number through the User and Services Configuration form, the Last Name and First Name field are disabled (grayed out).

6. Complete the other fields as required.

7. Click Save. The new directory number is reserved as a local-only directory number in the databases of each cluster element.

NOTE: In Analog device form, you click the Change button to add a local-only directory number. To modify an existing local-only directory number, you must first Clear the entry then add it again using the Change button.

Deleting Local-only Directory Numbers

To delete a local-only directory number:

1. Go to the User and Services Configuration form ( ) or the device-based form that lists the local-only directory number.

2. Find the local-only directory number using the Search functionality.

3. Select the local-only directory number.

4. Click Delete and then click Ok. The local-only directory number is deleted from the database of the local element.

NOTE: If other instances of this local-only number exist on remote cluster elements, they are not deleted from the remote elements after you delete the entry from the local element. In addition, the directory number remains as a local-only designated number in the databases of all elements in the cluster. To remove the local-only designation  from a directory number, you must delete it from the database of each element in the cluster.

 

• Local-only Directory Number - Description

• Local-only Directory Number - Conditions